Lead-free terminations, RoHS and Reach Compliant
Capacitance :
0.5pF to 0.47μFVoltage :
25V - 200VSize :
0201 to 2225Dielectric :
C0GFeatures
Torch brand Chip capacitors are of small size and light weight. They are non-polar and thus are easy to install. The C0G dielectric is classified as class I material, which is considered to be highly “stable” and is temperature compensating, with low loss in a circuit. C0G barely performs any variation in capacitance over time and voltage change, and its capacitance remains virtually unchanged in response to ambient temperature. SMD multilayer ceramic capacitors using this type of dielectric feature a working temperature of -55℃ to +125℃, with capacitance change limited to ±30 ppm/ºC.
Ordering Information
|
CC41 |
-0805 |
-C0G |
-50V |
-100pF |
-J |
-N |
-T |
|
Series |
Case size |
Dielectric |
Rated voltage |
Capacitance |
Capacitance tolerance |
Termination Finish |
Packaging |
|
CC41- Class I Ceramic |
0201 0402 0603 0805 1206 1210 1812 2220 2225 |
C0G |
4V 6.3V 10V 16V 25V 50V 100V 200V |
Refer to Capacitance and Rated Voltage Range |
B=±0.10pF C=±0.25pF D=±0.5pF F=±1% G=±2% J=±5% |
N=100% Sn |
T=7” Reel |
Dimensions
|
|
|
|
|
|
|
|
|
|
Unit:mm |
|
Size Code |
0201 |
0402 |
0603 |
0805 |
1206 |
1210 |
1812 |
2220 |
2225 |
|
L |
0.60±0.03 |
1.00±0.20 |
1.60±0.20 |
2.00±0.30 |
3.2±0.3 |
3.20±0.30 |
4.50±0.40 |
5.70±0.50 |
5.70±0.50 |
|
W |
0.30±0.03 |
0.50±0.20 |
0.80±0.20 |
1.25±0.20 |
1.6±0.3 |
2.50±0.30 |
3.20±0.30 |
5.00±0.50 |
6.50±0.60 |
|
Tmax |
0.35 |
0.70 |
1.00 |
1.45 |
1.90 |
2.80 |
3.50 |
4.20 |
4.20 |
|
t |
0.15±0.05 |
0.25±0.10 |
0.35±0.25 |
0.50±0.25 |
0.50±0.35 |
0.60±0.30 |
0.90±0.60 |
0.90±0.60 |
0.90±0.60 |
Electrical Characteristics
|
Item |
Specification Limits |
Measuring Conditions |
|
|
Operating Temperature Range |
C0G |
-55℃ to +125℃ |
— |
|
X7R |
|||
|
X5R |
-55℃ to +85℃ |
||
|
Capacitance |
Within specified tolerance |
— |
|
|
Q |
C0G |
CR≤30 pF: Q≥400+20CR CR＞30 pF: Q≥1000 |
C0G: CR≤1000PF 1MHz±10% 0.5V-5V CR>1000pF 1kHz±10% 1V±0.2V
X7R & X5R: CR≤10uF 1kHz±10% 1V±0.2V CR>10uF 120Hz±10 0.5V±0.2V |
|
X7R X5R |
UR≥50V , tgδ≤3.5%; 25V≤UR<50V , tgδ≤5.0%; 16V≤UR<25V , tgδ≤7.0%; 4V≤UR<16V , tgδ≤10%; ※Note: CR≥1μF，tgδ≤10 %; Size 0201,0402,0604 , tgδ≤10 %; |
||
|
Insulation Resistance |
10000MΩ or 100MΩ·μF whichever is less |
Rated voltage shall be applied within following conditions: UR≤500V UR UR>500V 500V Voltage applying time shall be 60±5 seconds, charging and discharging current shall be 50mA or less. |
|
|
Dielectric Strength |
No breakdown or visual defects |
250% of DC rated voltage for 5 seconds, charging and discharging current shall be 50mA or less. |
|
Storage
To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, measures should be taken to control temperature and humidity.
*Recommended conditions:
Even under ideal storage conditions, solderability of capacitors is deteriorated as time passes, so capacitors shall be used within 12 months from the time of delivery. When exceeding the above period, please check solderability before applying the capacitors to your circuit.
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass, filtering, transient voltage suppression, blocking, and energy storage.
--------------占位---------------
Capacitance ranging from 0.1 F to 3300uF Voltage ratings of 6V-500V Operating temperature range: X7R: -55℃~125℃ X5R: -55℃~85℃ Epoxy molded, high physical strength Tin/Lead solder plated (4% Pb minimum) 100% temperature cycling 100% accelerated steady state aging
Read More
Lead-free terminations, RoHS and Reach Compliant
Read More
Lead-free terminations, RoHS and Reach Compliant
Read More
Lead-free terminations, RoHS and Reach Compliant
Read More
Lead-free terminations, RoHS and Reach Compliant
Read More
IPv6 network supported
